Tankless Electric Hot Water Heater Faucet – Instant Heating Kitchen Tap with LED Display (No Shower)


4 in stock

Voltage: 220V

Frequency: 50 Hz

Power: 3000 W

Current: 14 A

Water pressure: ≥0.3 MPa

Waterproof Level: IPX4

Construction: Made with 304 stainless steel heating tube

Housing material: High temperature resistant ABS

Power cord length: 1.5M

Wire specification: 1.5² copper wire

Safety protect: Thermal protection ,leakage protector

Install type: Install on the wall or on the sink

3,762.00 4,702.50

4 in stock


  • Material: Made from environmental refined copper and ABS engineering plastics for durability and safety.
  • Heating Tube: Utilizes a high-purity copper liner as the heating element for efficient heating.
  • Instant Heating: Capable of heating water in just 5 seconds with a power rating of 3000 watts.
  • Temperature Control: Offers a temperature range from 30°C to 60°C, adjustable according to user preference.
  • Surface Treatment: Features multiple plating for a refined look.
  • Ceramic Spool: Diamond level ceramic spool for smooth operation.
  • Safety Measures: Equipped with thermal protection and a leakage protector for user safety.
  • Installation: Can be mounted on the wall or the sink, offering flexibility in installation.
  • Waterproof Level: Rated at IPX4, indicating a good level of water resistance.
  • LED Display: Includes an LED display for easy monitoring of water temperature.

How to Use:

  1. Installation: Ensure the faucet is correctly installed either on the wall or the sink by a professional, following the provided instructions.
  2. Connection: Connect the power cord to a 220V outlet, ensuring it meets the electrical requirements.
  3. Operation: Turn on the tap, and adjust the temperature as needed using the controls. The LED display will show the current water temperature.
  4. Adjustment: To change the water temperature, simply adjust the settings until you reach your desired temperature within the 30°C to 60°C range.


  • Energy Efficient: Heats water on demand, which can save on energy costs compared to traditional water heaters.
  • Space Saving: Its tankless design saves space in the kitchen or bathroom.
  • Instant Hot Water: Provides hot water within seconds, eliminating waiting time.
  • Safety Features: Includes thermal protection and a leakage protector for enhanced safety.
  • Easy to Install: Can be installed on a wall or sink, offering versatility in setup.


  • Limited to Single Point of Use: Designed for use at a specific sink, not suitable for multiple outlets.
  • Electrical Requirements: Requires a 220V outlet and might necessitate an electrical upgrade for some homes.
  • Water Pressure Dependent: Performance may vary based on water pressure, with a minimum of 0.3 MPa required.


Q1: Can this faucet be used for drinking water?

Yes, the faucet can be used for drinking water as it is made from environmental refined copper and ABS engineering plastics, which are safe for water contact. However, ensure your water source is potable.

Q2: How does the instant heating work?

The faucet uses a high-purity copper liner as a heating element that heats water on demand. When you turn on the tap, the water passes through this element, heating up almost instantly to your set temperature within the range of 30°C to 60°C.

Q3: Is it difficult to install the faucet?

The faucet is designed for easy installation on the wall or the sink. It is recommended to have it installed by a professional to ensure it is set up correctly and safely, especially considering the electrical components.

Based on 0 reviews

0.0 overall

Be the first to review “Tankless Electric Hot Water Heater Faucet – Instant Heating Kitchen Tap with LED Display (No Shower)”

There are no reviews yet.